The independent platform for the UK cleaning industry

Standards and compliance

COSHH for cleaning teams: turn assessments into safe routines

Connect chemical information with the work cleaners actually do. Build task-specific controls, practical training and a clear response to spills, exposure and changes.

A COSHH folder is useful only if it changes how work is organised. Cleaners need to know which product and method to use, how exposure is controlled and what to do when something goes wrong. Supervisors need to know that those arrangements are available and followed during the actual shift.

In Great Britain, HSE explains duties under the Control of Substances Hazardous to Health Regulations 2002, as amended. Northern Ireland has its own 2003 regulations and HSENI guidance. Use the appropriate framework for the workplace.

Assess the task, not simply the bottle

HSE explicitly states that a safety data sheet is not a risk assessment. The sheet describes the product’s hazards and supplies handling, storage and emergency information. Your assessment must connect that information to the way people will use the substance.

Start with a real task description: where it happens, who performs it and what equipment is used. Include preparation and disposal. An assessment labelled only “floor cleaner” can miss the difference between handling concentrate in a cupboard and using diluted solution across a large, ventilated space.

Build a reliable product inventory

Walk the site and compare the cupboard contents with the authorised product list. Record the exact product name, intended task and location. Flag unidentified containers, unexpected products and items brought in informally for investigation before they are used.

Match each authorised product to its current supplier information. Keep the label instructions and relevant safety data accessible to the people preparing the assessment. Establish a purchasing rule that substitutions go through review before delivery to site. A familiar brand name does not establish that a replacement formulation has the same instructions.

Include exposure beyond labelled chemicals

HSE warns that cleaning can involve skin irritation from wet work, allergies, asthma, burns and eye damage. The assessment should therefore examine how hands become wet, how products are applied and how contact might occur during ordinary work.

Consider dust and biological contamination where relevant, rather than limiting the exercise to bottles with warning symbols. Record who else could be exposed, including occupants and nearby workers. HSENI similarly stresses that hazardous substances can arise from work processes and that the assessment needs a competent person with appropriate knowledge.

Choose controls in a sensible order

Ask first whether the hazardous substance is needed for the task or whether a suitable safer method is available. Where exposure cannot be prevented, assess controls that reduce it. HSE advises against automatically treating personal protective equipment as the first or only solution.

For a practical review, ask the assessor to examine dispensing, handling, application and ventilation. Identify the conditions required for the proposed method to work. Record who provides and maintains each control. “Use safely” is not an instruction; “use the authorised dispensing system following its instructions” gives the supervisor something observable to check.

Make the instructions usable

Create a short task instruction linked to the assessment. Identify the authorised product, preparation method, application steps, required protective equipment and arrangements for finishing the job. Use the manufacturer’s actual directions; do not introduce a standard dilution for unrelated products.

Show the instruction at the point where the decision is made. A cleaner preparing solution needs access to the preparation directions there, not only in a manager’s office. Include words or illustrations that staff understand and check comprehension through a demonstration. A signature alone does not show that someone can carry out the method.

Prevent improvised combinations

London Fire Brigade warns that combining common cleaning products can produce dangerous reactions and fumes. Do not mix products or improvise a stronger cleaning solution. Follow the authorised method and the instructions on the containers.

Plan how an operative reports a task that the approved method has not completed satisfactorily. The next step should be a supervisor’s review, not adding another chemical. Include product changes and residual chemicals in that review. The safe response to poor results is to investigate the method, surface and contamination before choosing further treatment.

Prepare for abnormal situations

Use the assessment and product information to plan for spills, splashes, equipment failure and suspected exposure. State who raises the alarm, how others are kept away and which incidents require evacuation or emergency assistance.

Keep product identification available without requiring someone to re-enter an unsafe area. Do not expect an untrained cleaner to investigate an unknown reaction or carry out a specialist spill response. Test the communication arrangements as a practical exercise: the team should be able to locate the instructions and explain whom they would contact.

Check skin protection and working conditions

Discuss wet work and skin symptoms during supervision. HSE’s cleaning guidance recommends appropriate hand care and task-specific protective measures. Make reporting straightforward so that irritation is raised early rather than treated as an unavoidable part of cleaning.

Check that specified gloves and other protective equipment are actually available in appropriate sizes and condition. Observe whether the working method creates repeated contact that could be reduced. Where monitoring or health surveillance is required by the assessment, arrange it through competent support rather than assuming general supervision is sufficient.

Review when the work changes

HSE advises reviewing assessments and controls when circumstances change or their effectiveness is in doubt. Review after relevant incidents and when products, equipment, tasks or working arrangements change.

Keep a record of the decision, the revised instruction and who needs further training. Close the loop by observing the changed task. A useful COSHH system leaves the team with a clear method they can perform safely, supported by evidence that the controls work in the workplace.

Sources

  1. hse.gov.uk: Employer responsibilities for assessment, exposure control, training and emergency arrangements.
  2. hse.gov.uk: Safety data sheets support, but do not replace, a workplace risk assessment.
  3. hse.gov.uk: Assessment structure, control hierarchy, recording and review.
  4. hse.gov.uk: Cleaning-related skin and respiratory hazards, wet work and protective measures.
  5. hseni.gov.uk: Northern Ireland COSHH framework, competent assessment and control requirements.
  6. london-fire.gov.uk: Dangers from combining cleaning products and the importance of following instructions.

Facts checked against these sources on 19 November 2026. Spotted an error? See our corrections policy.

The CleanBow weekly

The week in UK cleaning, in one short email

New stories, practical guides, jobs and tenders closing soon. Free. Unsubscribe any time.