The independent platform for the UK cleaning industry

Sustainability

Reducing chemical and plastic use without weakening cleaning standards

Measure what the service uses, remove avoidable waste and trial changes against the same cleaning standard. Support environmental claims with evidence that reflects the whole system.

Reducing waste starts with understanding the cleaning service, not replacing every product carrying an unfamiliar ingredient. Establish the required result, identify unnecessary consumption and make changes that the team can operate safely. Measure the result before describing it as an improvement.

The Scottish Government’s waste-hierarchy guidance places prevention before preparing for reuse, recycling, other recovery and disposal. That provides a useful planning sequence. Check the waste requirements applicable to each site separately; collection and disposal rules should not be assumed identical throughout the UK.

Establish a useful baseline

Choose a representative operating period and record the work completed alongside the materials used. Track product issues, opening and closing stock, discarded containers and reasons for disposal. Record occupancy or service changes that could affect the comparison.

Separate concentrate from ready-to-use solution. Counting litres without identifying what they represent can produce a misleading comparison between products. Choose a consistent measure for your own operation, such as concentrate used per completed scheduled clean, and retain the underlying quantities. Do not describe a purchasing reduction as a usage reduction until stock movements have been reconciled.

Find waste in the existing routine

Walk through ordering, delivery, storage, preparation and use with the team. Look for duplicate products, damaged packaging, unused stock, unnecessary preparation and instructions that are difficult to follow. Ask cleaners where they lose time or materials.

Record the cause of each loss before deciding the solution. Overstocking needs a different response from a leaking dispenser or an unclear task instruction. Start with changes that remove a demonstrable problem while preserving the approved method. Assign someone to check that the improvement remains in place after the initial tidy-up.

Control preparation and dispensing

Use the manufacturer’s directions for the actual task and product. Check that measuring or dispensing arrangements deliver the intended quantity and that staff can follow them under normal shift conditions. Do not increase dilution beyond the instructions to meet a consumption target.

Where a new dispensing system is proposed, include installation, maintenance, training and failure arrangements in the assessment. Decide what happens when it is unavailable. London Fire Brigade warns against combining cleaning products; neither a refill programme nor an efficiency initiative should introduce improvised mixtures or unidentified contents.

Review products by purpose

Create a list connecting each product to a defined task. Ask whether several products perform the same authorised function and whether standardisation is appropriate. Keep specialist requirements visible so that rationalisation does not remove something needed for a particular surface or procedure.

HSE advises reviewing risks and controls when substances or methods change. Assess any proposed replacement before introduction, including handling and use. Avoid treating “natural”, “green” or a pleasant fragrance as evidence of safety or suitability. Retain the existing approved method until the replacement has been assessed and accepted.

Examine refill and packaging systems

Ask suppliers to describe the whole arrangement: container sizes, dispensing, permitted reuse, return logistics and what happens to damaged or empty packaging. Obtain instructions for identifying contents and preventing incompatible products from sharing containers.

Compare packaging on a consistent basis connected to delivered service. Include outer packaging and any liners or components needed by the system. Record whether a return actually takes place rather than counting every container as recovered when it is purchased. Do not assume that a technically recyclable item is accepted by the site’s actual waste service.

Treat reusable textiles as a service system

If considering reusable cloths or mop heads, include collection, laundering, drying, storage and replacement. Establish how clean and used textiles will remain distinct and how sufficient stock will reach every shift. Check compatibility with the site’s hygiene requirements.

Ask for product-specific care instructions and evidence supporting durability claims. Include laundering resources and losses in the comparison. A reusable item is not automatically the better choice in every setting, and a count of disposables avoided does not describe the complete environmental impact. Make the scope of your measurement explicit.

Run a controlled site trial

Choose a suitable area and obtain the client’s agreement. Write down the current method, proposed change and required cleaning result. Keep relevant conditions comparable and record differences that cannot be controlled, such as occupancy or unusual contamination.

Measure materials, working time, rework and any practical difficulties. Include operator feedback and supervision observations. Establish stopping conditions for damage, unsafe handling or failure to achieve the specification. Keep the original method available where appropriate. A trial should answer a defined purchasing or operating question, not simply produce a favourable photograph.

Report only what the evidence supports

The CMA’s Green Claims Code checklist calls for accurate, understandable claims backed by current evidence. It also stresses fair comparisons and the wider lifecycle. Specify the site, period, materials and boundary of any reported reduction.

For example, a measured change in purchased packaging is evidence about packaging within that scope. It does not by itself establish a reduction in carbon emissions or prove that the entire service is environmentally superior. Keep assumptions, exclusions and supporting records alongside the claim so that a client can understand exactly what was measured.

Make the change maintainable

Update the product list, task instructions, ordering quantities and training after an accepted trial. Remove obsolete instructions and agree responsibility for maintaining any new equipment. Include relief staff and new starters in the revised arrangements.

Review the same operational measures after the change has become routine. Investigate whether apparent savings resulted from postponed work, depleted stock or a change in service demand. Keep improvements that deliver the agreed standard with demonstrated reductions, and revise those that create rework or practical difficulties. Credible progress is specific, measured and repeatable.

Sources

  1. gov.scot: Waste prevention, reuse, recycling and consideration of the material lifecycle.
  2. hse.gov.uk: Assessing hazards and reviewing controls when substances or working methods change.
  3. gov.uk: Clear, substantiated environmental claims, fair comparisons and lifecycle context.
  4. london-fire.gov.uk: Following product instructions and avoiding unsafe combinations of cleaning chemicals.

Facts checked against these sources on 19 November 2026. Spotted an error? See our corrections policy.

The CleanBow weekly

The week in UK cleaning, in one short email

New stories, practical guides, jobs and tenders closing soon. Free. Unsubscribe any time.