The independent platform for the UK cleaning industry

Equipment

Choosing and maintaining floor machines for commercial cleaning

Specify a floor machine around the building, the cleaning task and the people using it. Compare complete working routines and plan maintenance before purchase.

A floor machine should fit the work your team actually performs. Start with the floor, available access and required result, then compare equipment. Buying from a headline coverage figure leaves unanswered questions about turning, filling, emptying, transport and the time needed to leave an area ready for use.

The following purchasing process combines official safety principles with practical editorial recommendations. The HSE legal references concern Great Britain; this is not a complete account of equipment law across every UK jurisdiction.

Write a task specification

List each floor type, its condition and any known surface treatment. Obtain the floor manufacturer’s care instructions where available. Describe the soil to be removed and the agreed finish. Avoid asking a supplier simply for a machine that will make every floor look shiny.

Separate routine cleaning from periodic restoration or specialist treatment. Record whether the proposed machine needs to scrub, recover liquid, polish or perform another defined operation. Ask the supplier to explain the complete method, including compatible brushes or pads and any separate recovery stage. Do not assume that similarly shaped machines perform interchangeable jobs.

Measure the building’s constraints

Measure doorways, lifts, storage entrances and the narrowest working routes. Record turning space, thresholds, slopes and changes of level. Check the route from delivery point to cupboard as carefully as the route across the floor.

Make a separate note of water supply, approved emptying points and available charging or electrical arrangements. Ask who controls access to these facilities outside normal opening hours. A machine should not be selected on the assumption that a cleaner can use a convenient sink, socket or lift without the client’s agreement.

Put operators into the selection process

HSE’s PUWER guidance requires suitable equipment and adequate information, instruction and training. Include the people who will use the machine in the assessment. Let them try the controls, adjustment points and normal working movements under appropriate supervision.

Assess pushing, pulling, carrying and component handling. HSE treats these as manual-handling activities; the machine’s stated weight is only one consideration. Note awkward reaches, the force needed to turn and the handling involved in filling or emptying. Record differences between users rather than describing a machine as universally easy to operate.

Compare complete task times

Arrange a controlled demonstration on a representative area, with the client’s permission. Agree the required result before starting. Use comparable areas and conditions where possible, and record the floor, soil, operator, settings, attachments and cleaning product.

Time preparation, travel from storage, cleaning, refilling, emptying and putting the equipment away. Check whether edges or confined areas need another method. Treat supplier productivity figures as claims to examine, not guaranteed site output. Keep the demonstration record with the purchasing decision so that later performance can be compared on the same basis.

Check the floor before reopening

Assess the result against the specification, including residual dirt, visible damage and remaining moisture. HSE advises using a method suitable for the floor and controlling pedestrian access while it remains wet. Build that requirement into the working schedule.

Ask the demonstrator to show what happens at turns, edges and changes of surface. Record any areas that require an additional pass or separate attention. Do not approve a method solely because the central demonstration strip looks satisfactory. The operational decision should include the whole area the client expects to use afterwards.

Calculate ownership costs

Request a written schedule covering the machine, required accessories, consumables, training, servicing and likely replacement components. Check what the warranty covers for the intended commercial use, who performs repairs and what arrangements apply during downtime.

Use your own working pattern to compare alternatives. Include the time required for routine care and any additional equipment needed to complete the job. If future replacement costs or service availability are unknown, show them as unresolved purchasing questions. Do not hide those gaps inside a single apparently precise cost-per-hour figure.

Establish checks and fault reporting

Before deployment, create a short checklist based on the manufacturer’s instructions and the site’s risk assessment. Identify who performs checks, where defects are recorded and how unsafe equipment is prevented from being used.

Give the process a practical home: a clear label on the machine and an accessible reporting route. Specify who can authorise its return to service. Where several teams share equipment, include a handover record so that a fault reported on one shift is not lost when the next team arrives.

Separate operator care from maintenance

HSE says maintenance must be undertaken by competent people and planned so that it can be completed safely. Identify which tasks trained operators may perform and which require a technician. Follow the manufacturer’s instructions for making the machine safe before work begins.

Schedule servicing around the actual conditions of use. Keep an existing maintenance log current and retain repair information. Ask the service provider to identify recurring defects and any change needed to the operating routine. Replacing the same component repeatedly without examining why it fails is not a satisfactory maintenance plan.

Review the purchase after deployment

Compare the first period of use with the demonstration record. Ask operators about access, handling, downtime and completion quality. Check whether the selected accessories and supplies are available when needed.

Record the findings for future purchases. A successful decision should be explainable: the machine suits these floors, fits these routes, achieves this required result and can be operated and maintained within the team’s arrangements. That is more useful than a brand preference or an unsupported claim that it is the fastest option.

Sources

  1. hse.gov.uk: Great Britain work-equipment duties covering suitability, safe condition, information and training.
  2. hse.gov.uk: Competent maintenance, safe isolation, fault reporting and maintenance records.
  3. hse.gov.uk: Manual handling includes pushing and pulling; risks must be avoided, assessed and reduced.
  4. hse.gov.uk: Matching the cleaning method to the floor and controlling access during drying.

Facts checked against these sources on 19 November 2026. Spotted an error? See our corrections policy.

The CleanBow weekly

The week in UK cleaning, in one short email

New stories, practical guides, jobs and tenders closing soon. Free. Unsubscribe any time.