The independent platform for the UK cleaning industry

Cleaning methods

Colour coding that works on site

Build a practical colour-coding system around cleaning risks, clear instructions and reliable supplies. Make it usable for permanent staff, relief cleaners and supervisors.

Colour coding should help a cleaner make the right decision at the point of work: which equipment belongs here, where it goes afterwards and when a fresh item is needed. A coloured cloth alone cannot provide that instruction. The useful system includes the site map, storage, work sequence, replenishment and supervision.

This guide sets out a practical way to organise those elements. Agree the arrangements with the client before introducing new colours or changing an existing cleaning method.

Start with the site’s rules

BICSc describes colour coding as recommended guidance and recognises that organisations use their own systems. Do not present one commercial cleaning chart as a universal legal requirement. Healthcare and other specialist environments may have prescribed local arrangements that your team must follow.

During mobilisation, collect the client’s current chart and cleaning procedures. Compare them with your company’s normal system. Resolve differences before staff arrive with equipment. Record which version applies, who approved it and where the instructions will be displayed. Remove superseded charts so that two competing systems are not visible in the same cupboard.

Map tasks before allocating colours

Walk the building with someone who knows how each area is used. List toilets, handwashing facilities, food areas, offices and any specialist rooms. Record surfaces and tasks as well as room names: an office building can contain several different cleaning risks.

Ask where equipment might move between areas and where the work changes during the day. A room used for meetings may also host food service. Write down how the cleaning arrangements respond to that use. Avoid leaving a relief cleaner to decide whether a room name or the activity taking place determines the equipment.

Use an appropriate, clearly labelled scheme

For education settings, UKHSA gives an example using red for toilets and washrooms, yellow for handwash basins and sinks, blue for general areas and green for kitchens. Treat this as a setting-specific example, not permission to overwrite the client’s approved arrangements elsewhere.

Translate the agreed scheme into plain labels. “General areas” needs a short list of included surfaces; “toilet equipment” should identify what stays within that zone. Put the same wording on the cupboard chart, trolley and task instructions. If exceptions are necessary, describe the exact exception rather than relying on someone remembering an induction conversation.

Make identification accessible

BICSc highlights the importance of accommodating difficulties with colour identification. Add words, symbols or numbers so that colour is not the only way to distinguish equipment. Check that labels remain readable when items are wet, worn or stored under the site’s normal lighting.

Ask staff to identify equipment using the actual items they will handle. This is more useful than asking whether they understand a poster. Include agency and relief workers in the exercise. Where translated instructions are needed, retain the same symbols and numbering across versions so supervisors can refer to a consistent system.

Plan the whole equipment journey

Draw a simple route from clean storage to the trolley, working area, used-equipment collection and reprocessing or disposal. Specify where unused stock sits and where used items go. Make those locations physically distinct and clearly labelled.

Choose a replenishment quantity from the actual work schedule and the approved change frequency. Record who checks stock and how a cleaner obtains replacements during an evening shift. Running short should trigger a defined response, such as pausing the affected task and contacting the supervisor, rather than borrowing equipment assigned to another zone.

Teach a sequence, not just a chart

BICSc recommends working from cleaner towards dirtier areas. Turn that principle into a site route showing the order of surfaces and the points at which equipment must change. Demonstrate the sequence in the room, including what happens when work is interrupted.

Build hand hygiene, glove changes where required, product instructions and equipment handling into the same demonstration. Colour coding does not replace those controls. For wet floor work, follow HSE’s advice to keep pedestrians away until the floor is dry or provide a dry route through properly managed sections. The cleaning method must remain safe throughout.

Separate routine work from exceptional contamination

Write a clear stopping point for work outside the routine specification. Blood, vomit, unidentified substances and suspected sharps should lead staff to the site’s specific procedure and an appropriately trained person. A colour allocation is not an instruction to handle every contaminant found in that area.

UKHSA’s education guidance also calls for plans covering additional cleaning during outbreaks. Agree who can authorise a change and how staff receive revised instructions. Keep those temporary arrangements distinguishable from the normal schedule, with an owner responsible for deciding when they end.

Check whether the system survives a real shift

Observe a complete task, including collecting supplies and putting equipment away. Ask the cleaner to explain what they would do if the right cloth were unavailable or an unfamiliar spill appeared. Look for unclear instructions and practical obstacles before treating a mistake as a training failure.

Use a short supervision record: task observed, issue found, immediate correction and follow-up owner. Review repeated problems with staff. A misplaced storage bin or inconsistent label may need changing across the whole site. The test of the system is whether a new or returning cleaner can follow it reliably during ordinary work.

Sources

  1. bics.org.uk: Recommended colour coding, local variations, accessible identification, training and working from cleaner towards dirtier areas.
  2. gov.uk: UKHSA guidance for education settings, including separate equipment, an example colour scheme and cleaning schedules.
  3. hse.gov.uk: Safe floor-cleaning methods and restricting access while floors remain wet.

Facts checked against these sources on 19 November 2026. Spotted an error? See our corrections policy.

The CleanBow weekly

The week in UK cleaning, in one short email

New stories, practical guides, jobs and tenders closing soon. Free. Unsubscribe any time.